Shimadzu GC-2010 Plus detector can install up to four detectors, each unit is individually controlled; gas detector using APC electronic pressure control (depending on the number of simultaneous installation of the detector type) flame ionization detector (FID) Temperature Range: ~ 450 ℃; detection limit: 1.5pgC / s (dodecyl); Dynamic range: 107 Thermal Conductivity Detector (TCD) Temperature Range: ~ 400 ℃; sensitivity: 20000mV · mL / mg (decanoate alkyl) electron capture detector (ECD) temperature range: ~ 400 ℃; detection limit: 6fg / s (γ-BHC); Dynamic range: 104 flame photometric detector (FPD) temperature range: ~ 350 ℃; detection limit: P 55fgP / s (tributyl phosphate), S3pgS / s (dodecanethiol); dynamic range: P 104, S103 hot flame ionization detector (FTD, or NPD, gas chromatography island Jian monopoly, TSD) temperature range: ~ 450 ℃; detection limit: N 0.1pgN / s (azobenzene), P0.03pgP / s (malathion); dynamic range: N, P 103 Shimadzu GC-2010 Technical parameters: Column Compartment Temperature range RT + 4 ℃ ~ 450 ℃ (when using liquid carbon dioxide * -50 ℃ ~ 450 ℃) * When using the optional liquid carbon dioxide takes another dimension length 280mm × width 175mm × 280mm high accuracy internal temperature setting volume 13.7L value (K) ± 1% (to 0.01 ℃ calibration) temperature deviation within 2 ℃ (in the distance the inner wall of 30mm, a diameter of 200mm circumference) changes in room temperature correlations <0.01 ℃ / ℃ program number section 20 (available cooling programs) Program ratio setting range -250 ~ 250 ℃ / min ~ 9999.99 minutes total time program cooling rate 450 ~ 50 ℃ for about 3.4 minutes injection unit can be installed up to three injection units, the import monopoly gas chromatography, each unit independently temperature control (and the number of installed units depend on the type of sample); standard configuration for split / splitless unit split / splitless unit (SPL-2010Plus) Temperature range: + 5 ℃ ~ 450 ℃ directly (full amount ) Injection unit (WBI-2010Plus) Temperature range: + 5 ℃ ~ 450 ℃ column injection / programmed temperature injector unit (OCI / PTV-2010) Temperature range: + 5 ℃ ~ 450 ℃; heating rate: 50 ℃ ~ 450 ℃ within 3 minutes; cooling rate: 450 ℃ ~ 50 ℃ 8 minutes (column temperature at 50 ℃); temperature program: The maximum heating rate of 250 ℃ / min, Agilent gas chromatographs, 7 segment can heat up, column Injection each programmed temperature injector unit can be switched (OCI and PTV change must replace the connection shunt pipe) Shimadzu GC Smart3. Operation and maintenance is simple (1) using a large LCD display that can accommodate a large amount of information part of the large display and graphical man-machine dialogue, analysis conditions can be set in a short time. (2) simple LED warning lights on the control panel, streamlined design of the LED warning lights use different colors and strobe, gas chromatography, played well overall Prompts. It uses all too familiar with exactly the same color of traffic lights to serve as a warning, letting arc design tedious testing work a little more playful. In addition, operating tips and all of the text on the keyboard using the character prompt, so users will not ignore or miss a control every detail. High-quality gas chromatograph, Chun Di instrument, gas chromatograph provided by Hunan Chun Di Equipment Co., Ltd.. "Biological, chemical analysis instruments, laboratory pre-treatment equipment, laboratory supplies and equipment timber" preferred Hunan Chun Di Equipment Co., Ltd. (www.hnjdyq.com/), the company is located: 199 Jintai Road, Kaifu District, Changsha Xiangjiang Xiangjiang Century City Heights 1 2802, over the years, Chun Di instrument to provide customers with the best quality of service, Contact: Lu Hao. Welcome to the new and old customers call, letter, visit the guide, business negotiations. Chun Di Instrument expect to be your long-term partner!